Filter
Top Products
1-23
1
LOADING PAPER
Loading paper in the stand/3 x 500 sheet paper drawer
Upper paper tray:
The upper tray is the same as the multi-purpose drawer. Use the upper tray according to the instructions for the multi-
purpose drawer on page 1-21.
Middle and lower paper trays:
Up to 500 sheets of SHARP recommended plain paper can be loaded in these trays. The method of loading paper is the
same as for paper tray 1 in the main unit. See the description (page 1-16).
NOTE
If the paper size or paper type is changed in either paper tray, the tray settings must be changed in custom settings. Refer
to
“Setting the paper size and type” on page 1-19.
■■
■■
■ Loading transparency film
Be sure to load the transparency film with the white label side up. Make sure no image will be printed on the label.
Printing on the label may cause smudges on prints. Transparency film must be set in the portrait orientation.
Specifications (multi purpose drawer)
Name Multi purpose drawer
Paper size/weight See specifications of paper trays on page 1-17.
Paper capacity 500 sheets (20 lbs. (80 g/m
2
)) of paper, 40 envelopes, 20 postcards
Dimensions 25-3/4" (W) x 22-21/64" (D) x 5-43/64" (H)
(654 mm (W) x 567 mm (D) x 144 mm (H))
Weight Approximately 24.3 lbs. or 11 kg
Specifications are subject to change for improvement without notice.
Specifications (stand/3 x 500 sheet paper drawer)
Name Stand/3 x 500 sheet paper drawer
Paper size/weight See specifications of paper trays on page 1-17.
Paper capacity 500 sheets (20 lbs. (80 g/m
2
)) each
(ordinary paper)
Dimensions 24-3/8" (W) x 26-5/32" (D) x 15-29/32" (H)
(619 mm (W) x 664 mm (D) x 404 mm (H))
Weight Approximately 70.6 lbs. or 32 kg