Filter
Top Products
5-18
SADDLE STITCH FINISHER
Saddle stitch finisher functions
■ Sort mode
Sorted sets will be delivered.
PrintoutsOriginal
■ Group mode
Groups of copies of the same page will be delivered.
PrintoutsOriginal
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation.
Offset will function for non-stapled printer or copier
output, Non-offset can only be selected for copier
output.
Stapled sets will not be offset.
■ Offset mode
Offset mode Non-offset mode
Supplies
AR-SC2 staple cartridges must be used for this finisher. The cartridge package
contains three cartridges approx. 5000 staples each.
Stapling capacity 8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m
2
)
8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m
2
)
*Up to two sheets of 34 lbs. or 128 g/m
2
paper can be included as covers.
Staples Upper tray: Single staple can be placed in the top left or lower left corners or two
staples can be centered on the left side.
Lower tray: 4-47/64" (120 mm) pitch from the center of paper
Power supply Requires the installation of an optional power supply unit (See page 1-8.)
Dimensions 28-9/32" (W) x 23-3/4" (D) x 39-3/8" (H) (718 mm (W) x 603 mm (D) x 1000 mm
(H))
Weight Approx. 86 lbs. (39 kg)
Name Punch module
Paper sizes for hole 3 holes: 11" x 17", 8-1/2" x 11", A3, B4
punching 2 holes: 8-1/2" x 14", 8-1/2" x 11"R
Specifications are subject to change for improvement without notice.