Filter
Top Products
26
JOB PROGRAM MEMORY
Frequently used job programs can be stored in each of ten storage registers. This is convenient for quick job recall
without losing time manually reprogramming each aspect of a job.
●
Selection for functions stored as part of a job program, will not be recalled as part of the program if the function has
been disabled or changed by a key operator program.
●
To exit the job memory mode, press the [CA] (clear all) key on the operation panel or touch the [EXIT] key on the
touch panel.
Storing a job program
1
Press the [#/P] key on the operation panel to
display the [STORE/DELETE] selection screen.
2
Touch the [STORE/DELETE] key to obtain the
storage register screen.
5
1
RECALL
M NUMBER.
STORE
/
DELETE
234
789
3
Touch a number key from 1 to 10 on the storage
register screen.
1
6
RECALL
ESS PROGRAM NUMBER.
PROGRAMS
STORE
/
234
789
Highlighted storage
register numbers are
registers which already
have programs stored. If a
highlighted number is
selected, a screen will
appear with selections for
deleting the selected
program, storing (replacing
the selected program with
a new one) or canceling to
go back to the STORE/
DELETE screen to select a
different storage register.
4
Make all copier selections to be stored.
TO STORE, MAKE SELECTIONS AND PRESS [OK],
TO DELETE, PRESS [CANCEL].
SPECIAL MODES
2-SIDED COPY
OUTPUT
8
1
2
/
11
X
8
1
2
/
11
X
8
1
2
/
11
X
11 17
x
8
1
2
/
11R
X
1.
2.
3.
4.
The number of copies
cannot be stored.
5
Touch the [OK] key.
EXPOSURE
AUTO
AUTO
100%
OK
8
1
2
/
11
X
11
X
8
1
2
/
11
X
8
1
2
/
11
X
11 17
x
8
1
2
/
11R
X
1.
2.
3.
4.
D PRESS [OK].
PAPER SELECT
COPY RATIO
CANCEL
The selected settings will
be stored under the register
number selected in step 3.
copy-2_Ep.P65 2/04/01, 19:1826