Filter
Top Products
0-1
TO USE THIS PRODUCT CORRECTLY AS A FACSIMILE
Several points must be kept in mind when using this product as a facsimile.
Please note the following:
■ Settings and programming
Information about settings and programming that are required before the fax functionality can be used is located in "Points
to Check and Programming after Installation" on page 1-2 of this manual. Please read this section and perform the
required settings and programming.
■ Lithium battery
A lithium battery inside the unit keeps settings and programmed information in memory.
• When the battery dies, settings and programmed information will be lost. Be sure to keep a written record of the
settings and programmed information. (Refer to page 6-14.)
• The life of the lithium battery is approximately 5 years if the main switch and fax power switch are kept continually
off.
• When the battery dies, please consult your dealer or your nearest Sharp customer assistance center. When the
lithium battery dies, a message will appear in the display and the unit will no longer function.
■ Other information
• If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information will
be retained in memory even if the power cord is unplugged.
INTRODUCTION
Thank you for purchasing this product. This manual only explains the facsimile functions of the product. For information
on loading paper, replacing toner cartridges, clearing paper jams, handling peripheral units, and other printer-related
information, please refer to your "Operation manual (for printer operation and general information)".
Additional manuals have been provided for copy and network scanner features. Please refer to these as necessary.
This manual assumes that several options have been installed.
• Keep the fax power switch turned on. (Page 0-
7 of "Operation manual (for printer operation
and general information)".)
Fax functions cannot be used when the power is
turned off.
T
EL
LINE