Sharp DM-3551 Printer User Manual


 
1-3
1
A LOOK AT THE OPERATION PANEL
Operation panel keys used for fax and keys displayed on the touch panel are explained here.
Touch panel (following page)
The machine status, messages and touch keys are
displayed on the panel. The display will change to
show the status of print, copy, network scaner or
fax according to which of those modes is selected.
Mode select keys (page 2-2)
Use to select the basic modes of the product.
IMAGE SEND key
Press to select fax mode and display the basic
screen of fax mode.
Numeric keys
Use to enter fax numbers, sub-addresses,
passcodes, and numerical settings.
C key (clear key)
Use to clear a mistake when entering fax numbers,
sub-addresses, passcodes, and numerical settings.
One digit is cleared each time you press the key.
When an original is being scanned, this key can also
be used to cancel scanning.
CA key
Use to cancel a transmission or programming
operation. When the key is pressed, the operation
is canceled and you return to the initial screen (next
page).
When sending a fax, this key is also used to cancel
an image setting, paper size setting, or special
function.
key (page 5-5)
This is used to produce tone signals when you are
on a pulse dial line.
Start key (page 2-3)
Press to begin scanning an original for fax
transmission.
NOTE
For information on the parts of the unit that are used for faxing, refer to page 3 of "Operation manual (for copier)". For parts that are
used for both faxing and printing, refer to page 1-4 of "Operation manual (for printer operation and general information)".