Filter
Top Products
1-7
1
LOADING A DOCUMENT
A document can be loaded in the auto document feeder or on the document glass. Multiple-page documents and long
documents can be loaded in the auto document feeder. Single-sheet documents and bound documents that cannot
be loaded in the auto document feeder can be loaded on the document glass.
1
Lift the document glass cover and make sure a
document is not placed on the document glass.
Gently close the cover.
2
Adjust the document guides on the auto document
feeder to the width of the document.
1
Open the document glass cover, and place the
document face down on the document glass.
Gently close the cover.
Original size detector
NOTE
Do not place any objects under the original size detector
plate. Closing the document glass cover with an object
underneath may damage the original size detector plate
and prevent correct detection of the document size.
3
Align the edges of the document pages and then
insert the stack in the document feeder so that
the first page is face down.
Insert the stack into the auto
document feeder until it
stops. The stack should not
be higher than the indicator
line (maximum 50 pages, or
30 pages for 8-1/2"x14" or
larger documents).
USING THE AUTO DOCUMENT FEEDER
USING THE DOCUMENT GLASS
Regardless of the size of the original, place the original
in the far left corner of the document glass. (Align the
upper left-hand corner of the original with the tip of the
mark.)
Document glass scale
mark
8-1/2"x11"
8-1/2"x11"R
11"x17"
8-1/2"x14"
Document glass scale
mark
5-1/2"x8-1/2"