Sharp DX-B350P Printer User Manual


 
10-1
Chapter 10: Clearing Paper Jams
When there is a paper jam, refer to the following
procedures and follow the instructions.
NOTE: Paper jams could be due to the printer installation
environment and type of paper used.
The diagram below shows the printer with the two optional
tray modules, duplex module, and Offset Catch Tray
installed.
NOTE: If the jammed paper is removed without opening the
top cover, you still need to open and close the top
cover. Doing this will remove the error message.
CAUTION: Never touch areas labeled as “High
Voltage.” Never touch a labeled area found on or
near the heat roller. If a sheet of paper is wrapped
around the heat roller, do not try to remove it by
yourself to avoid injuries or burns. Switch off the
machine immediately, and contact your service
provider.
“At the Toner
Cartridge”
“At the Duplex
Module”
“At the Fuser Unit”
“At the Paper Trays”
“At the Offset Catch
Tray”
In this Chapter...
At the Paper Trays
At the Fuser Unit
At the Toner
Cartridge
At the Duplex
Module
At the Offset Catch
Tray