Filter
Top Products
Connections
17
1. Installation
Connecting the telephone line cord
Insert one end of the line cord into the jack on the back of the machine
marked
TEL. LINE 1
. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Note: The fax machine is set for touch-tone dialing. If you are on a pulse
dial (rotary) line, you must set the fax machine for pulse dialing by
changing Option Setting 22. This procedure is described in Chapter 6,
Optional Settings.
Connecting a telephone (optional)
If desired, you can connect a telephone to the
TEL. SET
jack on the
back of the machine. (Remove the seal that covers the
TEL. SET
jack
before connecting the telephone.)
TEL.
LINE1
TEL.
SET
T
E
L
.
L
IN
E
1
T
E
L
.
S
E
T
all-FO6700.book Page 17 Wednesday, August 30, 2000 1:17 PM