Filter
Top Products
79
8
MISFEED REMOVAL
When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in
the display, and the machine stops copying or printing. If a misfeed occurs when
using the RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the
display. ("X" indicates the number of pages to be returned.) This indicates the
number of the originals that must be returned to the document feeder tray after a
misfeed. Return the required number of originals. This number will be cleared when
copying is resumed or the [CLEAR] key ( ) is pressed. If an original misfeed
occurs in the RSPF, the machine will stop and the error indicator will blink. To
remove a misfeed from the RSPF, see "D: Misfeed in the RSPF" (p.82).
1
Open the bypass tray, and
then open the side cover.
2
Check the misfeed location. Remove the misfed paper
following the instructions for each location in the illustration
below. If the error indicator blinks, proceed to "A: Misfeed in
the paper feed area" (p.80).
If paper is misfed here, proceed to "A:
Misfeed in the paper feed area" (p.80).
If paper is misfed here, proceed to "B:
Misfeed in the fusing area" (p.80).
If the misfed paper is seen from
this side, proceed to "C: Misfeed
in the transport area" (p.81).
!08-troubleshooting.fm 79 ページ ２００４年３月３０日 火曜日 午後４時３０分