Filter
Top Products
4
PRINTING FROM MACINTOSH
32
CONTENTS INDEX
Basic printing
(part 2)
5
Configure print settings.
Click next to "Copies &
Pages" ("General" in Mac OS
8.6 to 9) and select the settings
that you wish to configure from
the pull-down menu. The
corresponding setting screen
will appear.
6
Click the "Print" button .
Printing begins. The print job is delivered to one of the
following trays (depending on which output devices are
installed):
●
Job separator tray kit is installed: Upper tray
●
Finisher is installed: Center tray
The settings vary depending on the operating system
version, the printer driver version, and the application.
Note
●
The output tray can be selected in the key operator
programs (see "OUTPUT TRAYS" in the key
operator's guide).
●
The output tray can be selected when selecting print
settings at the time of printing. Select the output tray in
"Output" in the "Advanced" menu of the Print window.
●
If you are using Mac OS 8.6 to 9.x, select the output
tray in "Output" in the "Output/Document Style"
menu of the Print window.
●
If you are using Mac OS X v10.1 to 10.1.5, select the
output tray in the "Output" tab in the "Printer
Features" menu of the Print Window.
●
If the paper type setting in the printer driver is different
from the bypass tray's paper type setting in the
machine, printing may stop. To resume printing, press
the [PRINT] key on the operation panel, touch the
[BYPASS TRAY] key in the touch panel, and specify
the same paper type as in the printer driver.
Note