Sharp M270 Printer User Manual


 
6
TROUBLESHOOTING
52
CONTENTS INDEX
Improper printing operation
(part 1)
Printing is slow
Simultaneous use of two or more application
software programs?
Start printing after quitting all unused application software
programs.
Is an appropriate print quality selected in the printer
driver?
It takes longer to process the print data when
"SMOOTHING" is enabled or the resolution is set to 1200
dpi, and this may slow the printing speed. Be sure to select
print quality settings that are appropriate for the image being
printed.
Windows: Change the print quality settings in the "Advanced"
tab of the printer driver setup screen.
Macintosh: Change the print quality settings in the
"Advanced" menu in the Print window. (In Mac
OS X v10.1 to 10.1.5, change the print quality
settings in the "Advanced" tab of the "Printer
Features" menu.)
Two-sided printing is not possible
Is two-sided printing disabled in the key operator
programs?
Enable two-sided printing as explained in "DISABLING OF
DUPLEX" in the key operator's guide.
Stapling is not possible (when a finisher or
a saddle stitch finisher is installed)
Is stapling disabled in the key operator programs?
Enable stapling in the key operator programs (see
"DISABLING OF STAPLER" in the key operator's guide).
Is the finisher disabled in the key operator programs
(when a saddle stitch finisher is installed)?
Enable the finisher in the key operator programs. (See "USING
THE KEY OPERATOR PROGRAMS" in the operation manual
for the saddle stitch finisher, and "DISABLING OF STAPLER"
in the key operator's guide.)
Did you attempt to print more pages than can be
stapled?
When a finisher is installed, up to 30 sheets can be stapled.
When a saddle stitch finisher is installed, up to 50 sheets can
be stapled (up to 25 sheets when the paper size is B4,
Foolscap, or larger).
The saddle stitch tray can hold up to 20 sets when the
number of sheets is 1 to 5, or 10 sets when the number of
sheets is 6 to 10.
Are pages of different width mixed together in the
print job?
Stapling is not possible when pages of different width are
mixed together in a print job.