Filter
Top Products
8
SPECIFICATIONS
68
CONTENTS INDEX
Printer specifications
*
1
1200 dpi cannot be selected when using the PCL5e printer driver.
300 dpi can only be selected when using the PCL6 or PCL5e printer driver.
*
2
The factory default setting for memory used for the printer function is 16 MB. The proportion of IMC memory allocated to the
printer function can be changed in the key operator programs. See "MEMORY FOR PRINTER" in the "Key operator's guide".
*
3
Available only if the PS3 expansion kit is installed.
Printing speed
AR-M236/AR-M237: 23 pages/min. at 600 dpi, 13.5 pages/min. at 1200 dpi*
1
AR-M276/AR-M277: 27 pages/min. at 600 dpi, 13.5 pages/min. at 1200 dpi*
1
Resolution*
1
1200 dpi/600 dpi/300 dpi selectable
Memory
Standard memory: 64 MB
Additional memory slot: 1 slot (a 128 MB or 256 MB of additional memory module (144-pin SDRAM
SODIMM) can be installed)
IMC Memory
Standard memory: 32 MB*
2
Additional memory slots: 2 slots (maximum of 1024 MB of additional memory modules (168-pin
SDRAM DIMM) can be installed)
Emulation PCL5e, PCL6, PS3 (PostScript 3)*
3
Installed fonts
PCL6 compatible: 80 outline fonts and 1 bitmap font
PostScript 3 compatible*
3
: 136 outline fonts
Interface
IEEE 1284-compliant parallel interface
USB 2.0 (Full-Speed/Low-Speed) interface
10/100BASE-TX network interface
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Note