Sharp PNA601 Computer Monitor User Manual


 
E
39
AUDIO menu
Function
Command Direction
Parameter Reply Control/Response contents *1
*2
(A) (B)
TREBLE AUTR WR -5-5 -5-5
BASS AUBS WR -5-5 -5-5
BALANCE AUBL WR -10-10 -10-10
RESET ARST W 3
-
SETUP menu
Function
Command Direction
Parameter Reply Control/Response contents *1
*2
(A) (B)
OSDH-POSITION OSDH WR 0-100 0-100
OSDV-POSITION OSDV WR 0-100 0-100
SCREENMOTION SCSV WR 0-4 0-4 0:OFF,1-4:PATTERN1-4
MOTIONTIME1 MTIM WR 0-20 0-20
MOTIONTIME2 PATTERN1 MINT WR 10-990 10-990 Per10seconds
PATTERN2-4 MINT WR 5-20 5-20 Per second
MONITOR STDR WR 0-1 0-1 0:LANDSCAPE,1:PORTRAIT
LANGUAGE LANG WR 14 14 ENGLISH
1 1 DEUTSCH
2 2 FRANÇAIS
3 3 ITALIANO
4 4 ESPAÑOL
5 5 РУССКИЙ
6 6
POWERONDELAY PWOD WR 0 0 OFF
1-60 1-60 ON
STANDBYMODE STBM WR 0-1 0-1 0:STANDARD,1:LOWPOWER
(“ERR”whenSCHEDULEiseffectiveorOFFisselectedforLED.)
OFFIFNOOPERATION ATOF WR 0-1 0-1 0:OFF,1:ON
HOTPLUGCONTROL(DVI) HPCT WR 0-1 0-1 0:OFF,1:ON
-
HOTPLUGCONTROL(HDMI) HPCH WR 0-1 0-1 0:OFF,1:ON
RS-232C/LANSELECT CTLS WR 0-1 0-1 0:RS-232C1:LAN
-
IDNUMBER IDNO.SETTING IDST W 0-255 Setsthemonitor’sIDnumber.(“0”means“noIDnumber”.)
R 0-255 Returnsthemonitor’sIDnumber.
IDNO.SETTING
(ONCE)
IDSL W 1-255 SetsamonitorIDnumber.
ThisIDnumberisonlyeffectiveforthecommandimmediatelyafterthis
command.
0 ClearstheIDnumberifonehasbeendesignated.
IDNO.SETTING
(SUBSEQUENT)
IDLK W 1-255 SetsamonitorIDnumber.
ThisIDnumberiseffectiveforthenextandallsubsequentcommands
after this command.
0 ClearstheIDnumberifonehasbeendesignated.
IDCHECK IDCK W 0 ID :xxx
IDLK :yyy
Displaysmonitor’sownIDnumberandtheselectedIDnumberonthe
screen.
BAUDRATE BAUD WR 0-2 0-2 0:9600bps,1:19200bps,2:38400bps
OPTIONDCOUTSETTING DCOT WR 0-2 0-2 0:OFF,1:MODE1,2:MODE2 -
HDMIAUTOVIEW HDAW WR 0-1 0-1 0:OFF,1:ON
BRIGHTNESSSENSOR OPTS WR 0-2 0-2 0:OFF,1:ON,2:ON:DISPLAY
BRIGHTNESS
SENSOR
SETTING
WHENDARK:
AMBIENT
BRIGHTNESS
OPSD WR 0-99 0-99
WHENDARK:
SCREEN
BRIGHTNESS
OPDD WR 0-30 0-30
WHENLIGHT:
AMBIENT
BRIGHTNESS
OPSL WR 1-100 1-100
WHENLIGHT:
SCREEN
BRIGHTNESS
OPDL WR 1-31 1-31
CONTROLKITSETTING
(REMOTECONTROLSENSOR)
RCSL W 0-1 0:INTERNAL,1:EXTERNAL
“ERR”whentheremotecontrolsensorboxnotconnected.
R 0-1 0:INTERNAL,1:EXTERNAL
CONTROLKITSETTING
(BRIGHTNESSSENSOR)
BSSL W 0-1 0:INTERNAL,1:EXTERNAL
“ERR”whentheremotecontrolsensorboxnotconnected.
R 0-1 0:INTERNAL,1:EXTERNAL
SETTINGCOPYMODE CPMD WR 0 0 Copytoallmonitors.
1-225 1-225 CopytothemonitorwiththesetIDNumber.
SETTINGCOPYTARGET CPTG WR 0 0 CopiesthePICTUREmenusettings.
1 1 Copiesallthesettings.
LOGOSCREEN BTSC WR 0-1 0-1 0:OFF,1:ON
Controlling the Monitor with a PC (RS-232C)