Filter
Top Products
37
4
Flow of the Button Manager setting
The Button Manager can directly handle an AL-1641CS device event and start your
selected application according to the scan setting made on the AL-1641CS operation
panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
The settings for the Windows Event Manager for
the SHARP AL-1641CS device allow the user to
take advantage of the Sharp Button Manager to
take control of events from Windows and send
scanned images to any application that can be
selected in Button Manager.
This can be done with the Windows OS showing
the Event Manager selection dialog or directly
into a selected application if the Button Manager
is the only allowed handler for device events
from the SHARP AL-1641CS.
This is done by changing the Windows device
settings for the AL-1641CS in the Scanner and
Camera device settings in the Control Panel.
Scanner AL-
1641CS
SCANNER
key pressed.
Event
Manager
Windows OS
Button
Manager
No Selection
dialog is
displayed.
User
selected
application
The user
application
opens.
This is the Control Panel
Properties dialog for "Scanners and
Cameras".
The AL-1641CS is shown selected.