Filter
Top Products
E-46
Maintenance &
Troubleshooting
Replacing the Lamp
• Be sure to remove the lamp cage by the handle. Do not touch the glass surface of the lamp cage or the inside of the
projector.
• To avoid injury to yourself and damage to the lamp, carefully follow the steps below.
• Replace the lamp after turning off the power and unplugging the power cord.
Removing and installing the lamp unit
CAUTION
Turn off the power. Unplug the power cord.
46
Loosen the user service
screw that secures the
lamp cage cover.
5
Slide the lamp cage
cover in the direction
of the arrow.
1 3
Turn off the power.
2
Unplug the power cord. Remove the Swivel
Stand. (See page 17.)
Loosen and remove the
three-securing screws
from the lamp cage.
Press POWER OFF. Wait until the
cooling fan stops running.
7
Remove the lamp cage.
User service screws
Insert the new lamp cage
firmly into the lamp cage
compartment.
8
9
Tighten the three-
securing screws to
fasten the lamp cage.
D
T
-2
0
0
DT-200(E)#p46_47.p65 02.11.21, 11:46 AM46