Filter
Top Products
Setting 11: PBX RECALL
This sets the recall mode used for transferring calls on a PBX or utilising BT
Network services. Refer to your PBX manual or consult your supplier for the
correct setting if the factory setting is inappropriate. Enter 1 for earth recall, 2
for time break recall, or 3 for no operation.
1: Earth
2: Time break recall
3: No operation
• Initial setting: 2
STOP
FUNCTION
4
Press
until
display
shows:
PBX RECALL
Enter a number
from
1 to 3
FAX SIGNAL RX
FUNCTION
4
STOP
2
1
Setting 12: FAX SIGNAL RECEIVE
Your fax will automatically begin reception if you hear a high-pitched fax tone
after answering a call. If you use a computer fax modem on the same line, you
must turn this function off in order to prevent your fax from mistakenly
attempting to receive documents sent from the computer fax modem. Press 1 to
turn the function on, or 2 to turn it off.
• Initial setting: 1
Press
until
display
shows:
FAX SIGNAL RX
YES NO
or
JUNK # CHECK
Option Settings
118