Filter
Top Products
84
TaxProgramming
Use the following procedure to select any option included in the tax group:
NOTE
The register is adapted to US and Canadian tax systems. If the Canadian tax system is required,
the tax system must be changed, then program the tax rate or tax table and quantity for doughnut
exempt which are described in this section.
Prior to the entry of sales transactions, the tax programming must be performed in accordance with the
laws of the state. The register is provided with programming four different tax rate. The one-tax system is
sufcient to cover most areas. However, in some areas that has a separate local tax (such as a Parish tax)
or a hospitality tax, the multi-tax system is useful.
If the taxable item is entered, the tax will be automatically added to merchandise subtotal according to the
programmed tax status for the department. The tax can be also entered manually.
The register is provided with two types of tax programming methods. The % tax method is used for a straight
percentage rate per dollar. The table tax method requires tax break information from the state or local tax
ofces. Use the method which is acceptable in the state. The necessary data of tax programming will be
presented at local tax ofce.
Procedure
1.
In the SETTING window, select “12 TAX.”
• The TAX window will appear.
2.
Select any option from the following options list:
1 TAX SYSTEM
Tax system
2 TAX1
Tax1
3 TAX2
Tax2
4 TAX3
Tax3
5 TAX4
Tax4
6 DOUGHNUT EXEMPT
Doughnut exempt
The following illustration shows those options included in this programming group.
12 TAX 1 TAX SYSTEM
l
See “Tax system” on page 85.
2 TAX1
l
See “Tax1” on page 86.
3 TAX2
l
See “Tax2” on page 86.
4 TAX3
l
See “Tax3”on page 86.
5 TAX4
l
See “Tax4”on page 86.
6
DOUGHNUT EXEMPT
l
See “Doughnut exempt”on page 88.
The screen continues.