Shure A7WS Noise Reduction Machine User Manual


  Open as PDF
of 1
 
1. To avoid tearing the windscreen during removal, grip it from the plastic
ring and the base and remove by gently pulling and twisting.
2. If desired, adhere the supplied velcro strips around the microphone grille,
approximately one inch from the base of the grille (as shown above) to
hold new windscreen in place.
3. Install new windscreen by stretching over the velcro strips, then
squeezing at the base of the windscreen to adhere to the velcro. No
velcro strip inside the windscreen is needed, as the windscreen itself will
adhere to the velcro. To remove, grip at the base of the windscreen and
pull while twisting.
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
A7WS Windscreen
Instruction Sheet
©2005, Shure Incorporated
27B3111 (2)
Printed in U.S.A.