Filter
Top Products
6 Installing the SMART Hub SE240
Additional Cables Required
The SMART Hub SE240 comes with the cables and accessories documented on page 2. You may
need the following additional cables:
• a USB cable to connect the SMART Hub SE240 to your SMART product
NOTE: Your SMART product comes with a USB cable if it has a USB connector.
• a Cat 5 cable to connect the SMART Hub SE240 to your network
• two DVI cable, two USB cables and two Stereo Mini cables to connect the SMART Hub SE240
to computers
• an S-video cable and five RCA cables to connect the SMART Hub SE240 to video sources
• two RCA cables to connect the SMART Hub SE240 to speakers
Installing the SMART Hub SE240
Install the SMART Hub SE240 in three stages:
1. Mount the SMART Hub SE240.
2. Connect the SMART Hub SE240.
3. Verify that the SMART Hub SE240 firmware is current.
Mounting the SMART Hub SE240
You can mount the SMART Hub SE240 in one of the following configurations:
• 19" (48.3 cm) rack mounting (rack not included)
• wall mounting
• tabletop or shelf mounting
• under-shelf mounting
IMPORTANT
When mounting the SMART Hub SE240, ensure its fans are not obstructed, to allow
for proper cooling.