Filter
Top Products
Configuring the SMART Hub SE240 23
3. If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press OK.
NOTE: For information on the configuration settings password, see page 20.
4. Press Input Configuration.
5. Open the DVI 1 tab if you are configuring the SMART Hub SE240 for the first computer.
OR
Open the DVI 2 tab if you are configuring the SMART Hub SE240 for the second computer.
6. If desired, clear the Add a button for this input in the shortcut menu check box to remove
the button for the computer input from the shortcut menu.
NOTE: For information on the shortcut menu, see page 46.
7. In the Input device name box, type a name for the computer.
8. In the Input Type list, select Analog or Digital.
9. Press Apply All.
You’ve configured the SMART Hub SE240 for the computer.