Filter
Top Products
18
EZ CONNECT WIRELESS ACCESS POINT
TROUBLESHOOTING
Check the following items before contacting SMC
Technical Support.
1. If mobile users do not have roaming access
to the SMC2655W access point, check the
following:
Make sure that all the SMC2655Ws and
stations in the ESS in which the WLAN
mobile users can roam are configured to the
same WEP setting, SSID and authentication
algorithm.
2. If you can not connect to SMC2655W by
utility:
Make sure that your local IP domain conform
to the SMC2655W.
3. If you forget your password or your
SMC2655W has locked up, you can reset it to
factory defaults by performing the following
steps:
Power off the SMC2655W.
Push in the reset button located on the back
of the SMC2655W.
While holding in the button, apply power to
the AP.
The AP will start to load the default settings.
Wait for about 5 seconds. Release the Push
Button, then the AP will restart with the
factory default settings.