Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-10
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Table 4-2 Configuration Command Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line)# 4-14
Access
Control
List
access-list ip standard
access-list ip extended
access-list ip mask-precedence
access-list mac
access-list mac mask-precedence
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
4-114
DHCP ip dhcp pool Console(config-dhcp) 4-157
Interface interface {ethernet port |
port-channel id| vlan id}
Console(config-if)# 4-186
VLAN vlan database Console(config-vlan) 4-245
MSTP spanning-tree mst-configuration Console(config-mstp)# 4-229
Router router {rip | ospf} Console(config-router) 4-325
4-340
Class Map class map Console(config-cmap) 4-286
Policy Map policy map Console(config-pmap) 4-289
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#