Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-70
sntp client
This command enables SNTP client requests for time synchronization from
NTP or SNTP time servers specified with the sntp servers command. Use
the no form to disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the switch only records the time
starting from the factory default set at the last bootup (i.e., 00:00:00, Jan.
1, 2001).
• This command enables client time requests to time servers specified via
the sntp servers command. It issues time synchronization requests
based on the interval set via the sntp poll command.
show sntp Shows current SNTP configuration settings NE,
PE
4-73
clock timezone Sets the time zone for the switch’s internal clock GC 4-73
calendar set Sets the system date and time PE 4-74
show calendar Displays the current date and time setting NE,
PE
4-75
Table 4-22 Time Commands (Continued)
Command Function Mode Page