Filter
Top Products
F
LASH
/F
ILE
C
OMMANDS
4-89
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered
up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command.
See the table under the dir command for a description of the file information
displayed by this command.
Console#dir
file name file type startup size (byte)
------------------------------------- -------------- ------- -----------
Unit1:
D1016 Boot-Rom image Y 825500
V1000 Operation Code Y 3511280
Factory_Default_Config.cfg Config File N 455
startup Config File Y 4308
startup1.cfg Config File N 4268
-----------------------------------------------------------------------------
Total free space: 24117248
Console#
Console#whichboot
file name file type startup size (byte)
-------------------------------- ----------------------- ------- -----------
Unit1:
D1016 Boot-Rom image Y 825500
V1000 Operation Code Y 3511280
startup Config File Y 4308
Console#