Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-166
Command Mode
DHCP Pool Configuration
Usage Guidelines
The IP address of the router should be on the same subnet as the client.
You can specify up to two routers. Routers are listed in order of
preference (starting with address1 as the most preferred router).
Example
domain-name
This command specifies the domain name for a DHCP client. Use the no
form to remove the domain name.
Syntax
domain-name domain
no domain-name
domain - Specifies the domain name of the client.
(Range: 1-32 characters)
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Console(config-dhcp)#default-router 10.1.0.54 10.1.0.64
Console(config-dhcp)#
Console(config-dhcp)#domain-name sample.com
Console(config-dhcp)#