SMC Networks SMC8748ML3 Switch User Manual


 
C
OMMAND
L
INE
I
NTERFACE
4-338
Open Shortest Path First (OSPF)
Table 4-87 Open Shortest Path First Commands
Command Function Mode Page
General Configuration
router ospf Enables or disables OSPF GC 4-340
router-id Sets the router ID for this device RC 4-340
compatible rfc1583 Calculates summary route costs using RFC
1583 (OSPFv1)
RC 4-341
default-information
originate
Generates a default external route into an
autonomous system
RC 4-342
timers spf Configures the hold time between consecutive
SPF calculations
RC 4-343
Route Metrics and Summaries
area range Summarizes routes advertised by an ABR RC 4-344
area default-cost
Sets the cost for a default summary route sent
into a stub or NSSA
RC 4-345
summary-address Summarizes routes advertised by an ASBR RC 4-346
redistribute Redistribute routes from one routing domain to
another
RC 4-347
Area Configuration
network area Assigns specified interface to an area RC 4-348
area stub Defines a stubby area that cannot send or
receive LSAs
RC 4-350
area nssa Defines a not-so-stubby that can import
external routes
RC 4-351
area virtual-link Defines a virtual link from an area border
routers to the backbone
RC 4-353
Interface Configuration
ip ospf
authentication
Specifies the authentication type for an
interface
IC 4-356
ip ospf
authentication-key
Assigns a simple password to be used by
neighboring routers
IC 4-357
ip ospf
message-digest-key
Enables MD5 authentication and sets the key
for an interface
IC 4-358