Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-76
Web – Click Security, IP Filter. Enter the addresses that are allowed
management access to an interface, and click Add IP Filtering Entry.
Figure 3-37. Filtering Management Access
CLI – This example restricts management access for Telnet clients.
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Field Attributes (Web)
• Name – Interface label.
• Type – Indicates the port type.
(1000BASE-T, 1000BASE-SX, 1000BASE-LX or 100BASE-FX)
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
Console(config)#management telnet-client 192.168.1.19 4-36
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console#