C
ONFIGURING
THE
S
WITCH
3-152
promiscuous ports. Set PVLAN Port Type to “Host,” and then specify
the associated Community VLAN.
• Isolated VLAN – Conveys traffic only between the VLAN’s isolated
ports and the promiscuous port. Traffic between isolated ports within
the VLAN is blocked. Set the PVLAN Port Type to “Host,” then
specify an isolated VLAN by marking the check box for an “Isolated
VLAN,” and selecting the required VLAN from the drop-down box.
Web – Click VLAN, Private VLAN, Port Configuration or Trunk
Configuration. Set the PVLAN Port Type for each port that will join a
private VLAN. Assign promiscuous ports to a primary or isolated VLAN.
Assign host ports to a community or isolated VLAN. After all the ports
have been configured, click Apply.
Figure 3-69. Private VLAN Port Configuration