Sony C9000 Printer User Manual


 
41388601TH Rev.2 98 /
5. REGULAR MAINTENANCE
5.1 Consumables to be Regulary Replaced
It is recommended that a user should replace the consumables below according to the
replacement standard. (If not replaced, print quality is not assured or it may result in a failure.)
Part Name
Large-capacity
Toner Cartridge
ID Cartridge
Fuser Unit
Belt Unit
Time for Replacement
When the message “Toner Low”
is displayed.
When the message “Drum Life”
is displayed.
When the message “Fuser Life”
is displayed.
When the message “Belt Life” is
displayed.
Replacement Condition
After 15,000 copies have
been printed.
After 26,000 copies have
been printed. (at 3P/J)
After 80,000 copies have
been printed.
After 80,000 copies have
been printed. (at 3P/J)
Adjustment after Replacement
Replace the Toner cartridge.
Reset the drum counter
after drum replacement.
Reset the fuser counter.
Reset the belt counter.
The above consumables replacement may be performed by a user.
5.2 Cleaning
The inside and outside of this printer should be cleaned with a hand vacuum cleaner, if necessary.
Note:
Do not touch the Image drum terminal, LED lens array and LED head connectors.
5.3 Cleaning of LED Lens Array
When a longitudinal white band or stripes (that is, void or light printing) appear on a printed paper
surface, the LED lens array should be cleaned.
Note:
The LED head cleaner must be used to clean the LED lens array. (The LED head cleaner
is included in the Toner cartridge box.)
5.4 Cleaning of Pick-up Roller
When papers are not fed normally, the Pick-up roller should be cleaned.
Note:
Clean it with a soft cloth and alcohol. Be cautious not to damage the roller surface.
White band, white stripes
(Void or light printing)