Sony Car Amplifier Car Amplifier User Manual


 
2002 SONY MOBILE
PRODUCT GUIDE
Design and Specifications subject to change without notice.
 1200W Max Power
300W x 1 into 4W, 5-300Hz, @ 0.2%THD
600W x 1 into 2W, 5-300Hz, @ 0.6%THD
1000W x 1 into 1W, 5-300Hz, @ 1.2%THD
Class D Mono Subwoofer Amplifier
 MOSFET Outputs
 MOSFET Power Supply
 High Current 1W Stability
 Variable 50-300Hz Low Pass Filter
 40 HZ EQ Boost, RCA Output
 RCA and Speaker Level Inputs
Indicates step-up
XM-1600GSD
Mono Class D Amplifier
Other Specifications
Circuit system OTL (output transformerless) circuit
Pulse power supply
Inputs RCA pin jacks
High level input connector
Outputs Speaker terminals
Through out pin jacks
Speaker impedance 1  8W
Maximum outputs 600 W (at 4W)
1200 W (at 2W)
Rated outputs (supply voltage at 14.4 V)
300 W (20 Hz  300 Hz, 0.2% THD, at 4W)
600 W (20 Hz  300 Hz, 0.6% THD, at 2W)
1000 W (20 Hz  300 Hz, 1.2% THD, at 1W)
Frequency response 5 Hz  300 Hz ( +0.5 dB, -3 dB)
Harmonic distortion 0.06% or less (at 100 Hz, 4W)
Input level adjustment range
0.2  6.0 V (RCA pin jacks)
0.4  12.0 V (High level input)
Low-pass filter 50  300 Hz, 18 dB/oct
Low boost 0  10 dB (40 Hz)
Power supply voltage 10.5  16 V
Current drain at rated output : 40 A (4W)
Remote input : 2 mA
Dimensions Approx. 358 × 50 × 264 mm (w/h/d)
14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Mass Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories Mounting screws (4)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.