Filter
Top Products
5-45
ROUTING SWITCHER SYSTEM (E)
5-2. Setting Items of the Secondary Station
n
Checksum can be displayed from version V1.10 of the
BKS series.
Use checksum to check if the program data is correct,
in addition to the version number indication. (The
PGM CHECKSUM is mainly used.)
The following three types of checksum are available.
BOOT CHECKSUM=D039
Checksum of the program area that is used for starting
up the ROM.
PGM CHECKSUM=630F
Check of the area in which the actual programs are
stored.
ROM CHECKSUM=FF68
Checksum of the entire ROM.
Example of Setting Screen
Mother panel :
1) Select “PANEL MODE = 2” (mother machine).
2) Press [Enter].
The following contents are displayed on the setting screen.
3) Input the unused BLOCK number of the BLOCK &
MOTHER STATION LIST into the “*” column.
4) Press [Enter] to confirm the input contents.
Daughter panel :
1) Select “PANEL MODE = 3” (daughter panel).
2) Press [Enter].
The following contents are displayed on the setting screen.
3) Input the mother’s STATION ID number of the
BLOCK & MOTHER STATION LIST into the “**”
column.
4) Press [Enter].
When the ID number is input correctly, model name of
the mother panel appears as shown below.
5. Pressing [Ctrl] _ [E] switches to the menu display of
the secondary station.
Pressing [Ctrl] _ [D] returns to the menu display of
the primary station.
m
1. Various modes must be set individually on the units on
which mother panel and daughter panels are set.
2. Set the mother panel first when setting the mother
panel and daughter panel.
3. Setting of the mother panel and daughter panel is not
completed when the “PANEL MODE” setting alone is
performed.
Be sure to set the block numbers of mother panel and
to set the STATION ID (MOTHER ID) of the daugh-
ter panel side.
SONY ROUTING SYSTEM SETUP MENU BKS-R3210 V1.10 STATION NUMBER 6
SET PANEL STATUS
DISPLAY MODE = 1 1:STATUS 2:PROMPT
PROTECT MODE = 2 1:ON AIR 2:NORMAL
PHANTOM PROTECT = 1 1:PART PROT 2:FULL PROT 3:BUTTON LINK
PANEL MODE = 1 1:STAND ALONE 2:MOTHER 3:DAUGHTER
PANEL LAYOUT = 2 1:TYPE + NUM. 2:DIRECT *:UNRELATED
LEVEL MODE = 1 1:SINGLE 2:MULTI *:UNRELATED
DEST SELECTION = * 1:DISABLE 2:ENABLE *:UNRELATED
BLOCK & MOTHER STATION LIST
BLOCK 1 = ....... | BLOCK 6 = .......
BLOCK 2 = ....... | BLOCK 7 = .......
BLOCK 3 = ....... | BLOCK 8 = .......
BLOCK 4 = ....... | BLOCK 9 = .......
BLOCK 5 = ....... | BLOCK10 = .......
BOOT CHECKSUM=D039 PGM CHECKSUM=630F ROM CHECKSUM=FF68
Ctrl-E:MENU Ctrl-D:RETURN
SET BLOCK NUMBER = *
MOTHER STATION BLOCK LIST
BLOCK 1 = ....... | BLOCK 6 = .......
BLOCK 2 = ....... | BLOCK 7 = .......
BLOCK 3 = ....... | BLOCK 8 = .......
BLOCK 4 = ....... | BLOCK 9 = .......
BLOCK 5 = ....... | BLOCK10 = .......
MOTHER STATION ID = ** (The designated ID is not found)
MOTHER STATION BLOCK LIST
BLOCK 1 = STATION 6 | BLOCK 6 = .......
BLOCK 2 = ....... | BLOCK 7 = .......
BLOCK 3 = ....... | BLOCK 8 = .......
BLOCK 4 = ....... | BLOCK 9 = .......
BLOCK 5 = ....... | BLOCK10 = .......
MOTHER STATION ID = 6 (BKS-R1607)