Sony ER-A420 Cash Register User Manual


 
114
Functional programming
You can set each media for:
CAT transaction is compulsory
CAT action (POST-AUTH/DIAL)
CAT type (CREDIT/DEBIT/CHECK)
Card number printing selection
Card number print format (partial/full)
CAT signature line print selection
CAT expiration printing selection
Number of CAT authorization receipts (0 - 9)
Bill (slip) print compulsory
Footer printing on receipt
This programming decides whether or not your machine should print a message at the foot of a receipt when a
specified media key is used.
Non-add code compulsory
You can enforce the non-add code entry when a media entry is accepted.
Change enable (over tender enable)
Either change enable or disable can be selected for a corresponding media key.
Validation printing compulsory
If media entries must be validated, set the corresponding media for compulsory validation print.
Drawer opening
You can program each media key to or not to open the drawer.
Amount tendered compulsory
You may select amount tendered compulsory or optional for the
a
,
Å
,
k
, and keys.
You may select amount tendered compulsory or inhibited for the
'
thru
,
keys.
*1: Function no.
61: For the
a
key 80: For the
*
key 87: For the key
62: For the
Å
key 82: For the
+
key 56: For the
S
key
76: For the
'
key 84: For the
,
key 63: For the
f
key
78: For the
)
key 86: For the
k
key 159: For the
key
2320
.
@ @
s
a
Function no.
ABCDEFGHIJKLMNO
*1 *2
To program zero
To program any media function
Procedure
Direct2320
PGM 2
Programming for the
a
,
Å
,
k
, , and
'
thru
,
keys
7
CHK2
CHK2
CHK2
ER-A410/A420(SEC)-4 03.12.22 0:20 PM Page 114