Filter
Top Products
41
5
BEFORE INSTALLATION
Hardware and software requirements
Check the following hardware and software requirements in order to install the
software.
*
1
The machine's USB connector will transfer data at the speed specified by the USB 2.0
(Hi-Speed) only if the Microsoft USB 2.0 driver is installed in the computer.
*
2
Compatible with Windows 2000 Professional, Windows XP or Windows Vista
preinstalled model standardly equipped with a USB port.
*
3
Printing is not available in MS-DOS mode.
*
4
The machine does not support printing from a Macintosh environment.
*
5
Administrator's rights are required to install the software using the installer.
Installation environment and usable software
The following table shows the drivers and software that can be installed for each
version of Windows and interface connection method.
* The printer driver that is installed will vary depending on the type of connection
between the machine and your computer.
Computer type IBM PC/AT or compatible computer equipped with a
USB2.0*
1
/1.1*
2
or 10Base-T LAN interface
Operating system*
3
*
4
Windows 2000 Professional*
5
, Windows XP*
5
, Windows Vista*
5
Display 1024 x 768 dots resolution and 16-bit color or higher is
recommended.
Hard disk free space 150 MB or more
Other hardware
requirements
An environment on which any of the operating systems
listed above can fully operate
Cable Operating system
Printer
driver
Scanner
driver
Button
Manager
Sharpdesk
USB
Windows 2000/XP/Vista
Available*
Available
LAN
Windows 2000/XP/Vista
Not Available
!FO-2080.book 41 ページ ２００９年５月１５日 金曜日 午前１０時４２分