Sony FO-2080 All in One Printer User Manual


 
INSTALLING THE SOFTWARE
46
Connecting a USB cable
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the
machine. Please purchase the appropriate cable for your computer.
1
Insert the cable into the USB
connector on the machine.
2
Insert the other end of the cable into your computer's USB port.
USB is available with a PC/AT compatible computer that was
originally equipped with USB and had Windows 2000 Professional,
Windows XP or Windows Vista preinstalled.
Do not connect the USB cable before installing the printer driver. The
USB cable should be connected during installation of the printer
driver.
If the machine will be connected using a USB 2.0 port of your
computer, please purchase a USB cable that supports USB 2.0.
To obtain the fastest USB 2.0 data transfer speed, "USB2.0 MODE
SWITCH" in the machine's user programs must be set to
"HI-SPEED". For more information, see "USER PROGRAMS" (p.66).
Use the machine's "HI-SPEED" mode only when using a computer
that is running Windows 2000/XP/Vista.
Even when the Microsoft USB 2.0 driver is used, it may not be
possible to obtain full USB 2.0 speed if a PC card supporting USB 2.0
is used. To obtain the latest driver (which may enable a higher
speed), contact the manufacturer of your PC card.
Connection is also possible using a USB 1.1 port on your computer.
However, the specifications will be USB 1.1 specifications
(Full-Speed).
Caution
Note
!FO-2080.book 46 ページ 2009年5月15日 金曜日 午前10時42分