Filter
Top Products
– 27 –
KP-41S5/41S5B/41S5G/
41S5K/41S5R/41S5U
RM-862
5-3. REGISTRATION (CONVERGENCE)
ADJUSTMENT METHOD
PAL REGISTRATION ADJUSTMENT
1) Receive the PAL SPCB signal.
2) Select Service mode and enter adjustment items for Green
signal.
With the joystick:
>. Items change
? / Data change
In internal pattern it appears only RG or G only.
ITEM CHSW 01 External pattern
CHSW 00 Internal pattern
CENTER ADJUSTMENT
1) Adjust GH and GV CENT.
GV CENT
MAIN DEFLECTION ADJUSTMENT
1) Adjust VSP V-Lin.
Correct linearity of the horizontal top and bottom lines.
VSP VLINE
2) Adjust AFC ANGLE
Correct the vertical center line to be in parailel with the screen
edges and other colors.
AFC ANGLE
UP CORN PIN
6) Adjust UP CORN PIN
Correct the screen top section line bow.
PIN PHASE
5) Adjust PIN PHASE
Correct the vertical left and right lines to be in parallel with
each other.
4) Adjust PIN AMP
Correct the vertical left and right lines and eliminute pin-
cushion-shaped distortion.
PIN AMP
3) Adjust AFC BOW
Correct linearity of the vertical center line.
AFC BOW
GH CENT
SIZE ADJUSTMENT
SPEC : H-SIZE 16.4 +/- 0.15 Sq.
V-SIZE 12.3 +/-0.15Sq.
VSP VSIZE
VSP HSIZE
5-4. GEOMETRY
Before adjust GEOMETRY, sure the data in
convergence.
• GH SIZE = 0
• GV SIZE = 0
• Adjust S correction