Sony PCG - R600 MX Laptop User Manual


 
Sony Notebook User Guide
Getting help
81
nN
About the docking station
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive of the docking station connected to the
notebook
To switch on the i.LINK network switch, proceed as follows :
1 Disconnect your notebook from the docking station.
2 Disconnect the AC adapter and all cables from the docking station if necessary.
3 Set the i.LINK network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
4 Connect the docking station to your notebook.
5 Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
Do not set the i.LINK network switch when the notebook is on. It causes malfunction.
Set the i.LINK network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM of the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK cable
Set the i.LINK network switch on the bottom of the docking station to the On position.
I cannot remove the disk inserted in the drive
You cannot remove disks when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
The disk tray does not eject even when the eject button is pressed
Open the tray by inserting a sharp, pointed object in the manual eject hole.