Filter
Top Products
18
To use the Access Point for your local network only
The Access Point may be used simply as a hub for wireless computers
in your local network without Internet access. Use of the Access Point
in this manner enables file sharing among client computers. In such a
case, a power connection is the only requirement (Page 19).
You may also connect computers to the Access Point via a hub, using
the 10BASE-T connector to make them wired LAN clients (bridging).
Notes
• To connect a hub to the 10BASE-T connector on the Access Point, use a
straight-through Ethernet cable (same order color code when side by side).
• To connect a computer directly to the 10BASE-T connector on the Access
Point, use a crossover Ethernet cable (reverse order color code when side by
side).
• A category 5 Ethernet cable is recommended.
HUB
To 10BASE-T
connector