Filter
Top Products
28
Troubleshooting
If you experience any of the following
difficulties while using the Access
Point, this troubleshooting guide may
help you remedy the problem. Should a
problem persist, consult the Sony
Customer Information Service Center.
On the Access Point
The Access Point is not operating
properly.
c The Access Point is not supplied
with power.
Connect the Access Point to a
power outlet with the supplied AC
power adapter. (See page 19.)
c There is an obstacle between the
Access Point and the computer
containing the Wireless LAN PC
Card, or they are too far apart from
each other.
Remove the obstacle between them,
or place them within 100 m
(approx. 330 feet) of each other.
(The communicable distance
depends on the environment.)
c The Access Point and the telephone
line (for PCWA-A100 only), or the
Access Point and the ISDN router/
Cable modem/DSL modem, is not
connected to each other with a
proper cable.
Make sure to use the cable
described in this manual. (See page
14, 15, 16, 17.)
The indicators do not come on.
c Cables are not properly connected.
– If you are using PCWA-A100,
check if the modular plug is
connected properly.
– Check the cables for validity.
I have forgotten the settings for the
Access Point I am currently using, and
cannot make a connection. This also
means that I cannot connect to the
Internet.
cWith the Wireless LAN PC Card
(PCWA-C100) correctly installed in
the computer, redo the Access Point
settings. For details, see the section,
“If you forget the Access Point
settings” on page 22.