Filter
Top Products
Using the Keyboard
17
Fn+ /
(F7)
Switch to th e
external
monitor/LCD
Toggles through the LCD, external display (connected to the
Monitor connector) and both LCD and external display.
Connect the cable before you turn on the notebook, otherwise
Fn + F7 will not work.
Fn+ only/
(F8)
Control AV out
Toggles between LCD-only and dual LCD/TV display
modes.
Connect the cable before you turn on the notebook, otherwise
Fn + F8 will not work. You cannot use the Fn + F8 function
to switch between LCD and TV once a DVD is inserted into
the optical drive.
Fn+ (F12)
Hibernate
Provides for the lowest level of power consumption.
When you run this command, the state of the system and state
of the peripheral devices are written to the hard disk and the
system power is turned off. To return the system to its
original state, use the power button to turn on power.
Fn+Esc
Standby
Puts the system into Standby mode, a power management
state. To return the system to the active state, press any key.
✍ You can also carry out these functions using the center Jog Dial™ control. Some
functions are not available until Windows® launches.
Combinations/
Feature Function
Only LCD
LCD and external display
Only external display
Only LCD
LCD and external display
Only external display