Filter
Top Products
27
GB
Security Lock
Convenient Function
Security Lock
The projector is equipped with a security
lock function. When you turn the power of
the projector on, you are required to input
the previously set password. If you do not
input the correct password, you will not be
able to project the picture.
You will not be able to use the projector if you
forget your password and the password
administrator is not available. Be please aware
that using the security lock can prevent valid
usage in such cases.
To use the security lock
1 Press the MENU key and then, in the
INSTALL SETTING menu, turn on
the
“Security Lock” setting.
2 Enter the password.
Use the MENU, </,/M/m, and
ENTER keys to enter the four-digit
password. (The default initial password
setting is “ENTER, ENTER, ENTER,
ENTER.” After this is entered you can
put in your own password. Therefore
when you use this function for the first
time, please input “ENTER” four times.)
Next, the screen for entering the new
password is displayed. (Enter the
password at this screen even if you want
to keep the current password.)
3 Enter the password again to confirm.
When the following message is
displayed, the setting for security lock is
completed.
If “Invalid Password!” is displayed on
the menu screen, perform again from
step 1.
Note
Enter password key.
Password required for power-on.
Use: Cancel: Other key
Enter new password key.
Power-on cannot be performed
without the password.
Use: Cancel: Other key
Re-enter new password key.
Be sure to remember this password.
Use: Cancel: Other key
INSTALL SETTING
Input-A
Security Lock enabled!
X
Tilt...
V Keystone: Auto
Side Shot: 0
Auto Focus: On
Image Flip: Off
Background: Blue
Test Pattern: Off
Lamp Mode: Standard
Lens Control: On
High Altitude Mode
: Off
Security Lock: On
Tilt...
V Keystone: Auto
Side Shot: 0
Auto Focus: On
Image Flip: Off
Background: Blue
Test Pattern: Off
Lamp Mode: Standard
Lens Control: On
High Altitude Mode
: Off
Security Lock: Off
INSTALL SETTING
Input-A
Invalid Password!
X