Sony SRX-R105 Projector User Manual


 
19
GB
Connecting the Projector
Chapter 2 Preparations
Connecting the Projector
When you connect the projector, make sure to:
Turn off all equipment before making any connections.
Use the proper cables for each connection.
Insert the cable plugs firmly; loose connections may
increase noise and reduce performance of picture
signals. When pulling out a cable, be sure to pull it out
from the plug, not the cable itself.
When installing the optional input board, consult with
the Sony dealer.
Refer also to the instruction manuals of the equipment to
be connected.
Connecting with HD-SDI Equipment
Attach the optional LKRI-002 HD-SDI (4:2:2) input board
to the input board attachment part, and connect the
HDCAM recorder/player.
Connecting with Component/Video
GBR Equipment
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a DVD recorder/player or analog video equipment
equipped with the component output, or an high-definition
equipment equipped with a video GBR connector.
When connecting to the output of HD component
equipment, set “Signal Mode” of “Input Source” in the
PICTURE CONTROL window to “Y/Pb/Pr,” and when
connecting to the output of HD video GBR equipment, set
to “RGB.”
For details, see page 26.
SRW-5000
HD DIGITAL VIDEO CASSETTE RECORDER
IN
INTER LOCK
ETHERNET RS232C
OUT
IN OUT
IN connector
HD-SDI connecting cable
(not supplyed)
HDCAM recorder/player, etc.
Left side
to HD-SDI output
Note
INTER LOCK
ETHERNET RS232C
R(Pr/Cr)B(Pb/Cb)HD VDG(Y/Y)
R(Pr/Cr)B(Pb/Cb)HD VDG(Y/Y)
IN OUT
IN OUT
R/Pr / G/Y / B/Pb
connectors
Component cable, etc
(not supplied)
Betacam, DVD recorder/player, etc.
Left side
to component output/
video GBR