Filter
Top Products
35
GB
Specifications
Chapter 5 Others
Specifications
Optical characteristics
Projection system
SXRD (Silicon X-tal Reflective Display)
3 panel prism color integration system
SXRD 8,847,360 pixels (4098 × 2160 × 3)
Lens Optional
Light output SRX-R110: 10,000 ANSI
1)
lm ± 10%
(factory preset value)
SRX-R105: 5,000 ANSI
1)
lm ± 10%
(factory preset value)
Lamp SRX-R110: 2 kW Xenon lamp × 2
SRX-R105: 1 kW Xenon lamp × 2
1)ANSI lumen is a measuring method of American National Standard IT
7.228.
Electrical characteristics
Acceptable signal
Component, XGA, SXGA, WXGA, HD
(when the LKRI-001 analog input
board is installed)
HD-SDI (SMPTE Serial Digital Interface
standard) (when the LKRI-002 HD-
SDI (4:2:2) input board is installed)
Input/Output
INTER LOCK Minijack
Normal operation at short circuit
Lamp power off at open circuit
RS232C D-sub 9-pin (female) (For details, see
“Pin assignment” on page 36.)
ETHERNET 10BASE-T/100BASE-TX
Input signal
When the LKRI-001 is installed
Analog RGB/component: BNC type
R/R-Y: 0.7 Vp-p ±2 dB positive, 75
ohms terminated
G/G SYNC: 0.7 Vp-p ±2 dB positive,
75 ohms terminated
G with sync/Y: 1 Vp-p ±2 dB sync
negative, 75 ohms terminated
B/B-Y: 0.7 Vp-p ±2 dB positive, 75
ohms terminated
SYNC/HD: Composite sync: 0.6 – 8
Vp-p, high impedance, sync positive/
negative
Horizontal sync: 0.6 – 8 Vp-p, high
impedance, sync positive/negative
VD: Vertical sync: 0.6 – 8 Vp-p, high
impedance, sync positive/negative
HDTV (YP
bPr): BNC type
Y: 1 Vp-p ± 2 dB positive, 75 ohms
terminated
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
P
b/Pr: 0.35 Vp-p ± 2 dB positive, 75
ohms terminated
HDTV (GBR): BNC type
G with sync: 1 Vp-p ± 2 dB, 75 ohms
terminated
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R (GBR): 0.7 Vp-p ± 2 dB positive,
75 ohms terminated
When the LKRI-002 is installed
SMPTE format HD
General
Dimensions
740 × 500 × 1320 mm (29
1
/4 × 19
3
/4 ×
52 inches) (w/h/d)
Mass Approx. 110 kg (242 lb 8 oz) (excluding
the optional lens)
Power requirements
SRX-R110: 200 to 240 V AC, 50/60 Hz
SRX-R105: 100 to 240 V AC, 50/60 Hz
Power consumption
SRX-R110: Max. approx. 5.4 kW
(Standby mode: 40 W)
SRX-R105: Max. approx. 3.0 kW
(Standby mode: 40 W)
Current consumption
SRX-R110: 30 to 22 A
SRX-R105: 30 to 12.5 A
Operating temperature
5°C to 35°C (41°F to 95°F) (About 20
minutes of aging is recommended to
provide better quality picture.)
Performance guarantee temperature
10°C to 30°C (50°F to 86°F)
Operating humidity
35% to 85%
Storage temperature
–20°C to + 60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander RM-PJ4K (1)
Size AA (R6) batteries (2)
SRX Controller (CD-ROM) (1)
Ethernet cable (cross cable manufactured
by Sony: 1-830-803-11) (1)
Operating Instructions (1)
Installation Manual for Dealers (1)
Operating Instructions (CD-ROM) (1)
Quick Reference Guide (1)