Filter
Top Products
39
Specifications
Chapter 5 Others
5°C to 35°C (41°F to 95°F) (About 20
minutes of aging is recommended to
provide better quality picture.)
Performance guarantee temperature
10°C to 30°C (50°F to 86°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander RM-PJ4K (1)
Size AA (R6) batteries (2)
SRX Controller (CD-ROM) (1)
Ethernet cable (cross cable manufactured
by Sony: 1-830-803-12) (1)
M8 screws for lens mounting (4)
Operating Instructions (SRX-T110/
T105) (1)
Operating Instructions (LKRI-005) (1)
Operating Instructions (CD-ROM: SRX-
T110/T105) (1)
Installation Manual for Dealers (CD-
ROM) (1)
Optional accessories
Projection lamp house
LKRX-B110 (for SRX-T110)
LKRX-B105 (for SRX-T105)
Projection lamp
LKRX-110 (for SRX-T110)
LKRX-105 (for SRX-T105)
Analog input board
LKRI-001 (analog RGB/component/HD
input with 5 BNC type)
HD-SDI (4:2:2) input board
LKRI-002 (HD-SDI input/output with 2
BNC type)
HD-SDI (4:4:4) input board
LKRI-003 (HD-SDI input/output with 4
BNC type)
DVI interface board
LKRI-004 (2DVI-D input connectors)
HDCP DVI board
LKRI-005 (2DVI-D input connectors)
Projection lens
LKRL-Z115 (1.48 to 1.81-times zoom
lens)
LKRL-Z117 (1.72 to 2.39-times zoom
lens with zoom/focus memory
function)
LKRL-Z119 (1.81 to 2.94-times zoom
lens with zoom/focus memory
function)
LKRL-Z122 (2.23 to 4.03-times zoom
lens with zoom/focus memory
function)
LKRL-Z140 (3.81 to 7.12-times zoom
lens)
LKRL-90 (0.9-times fixed focus lens)
8-inch exhaust adaptor
LKRA-001
Design and specifications are subject to change without
notice.
Pin assignment
RS232C connector (D-sub 9-pin, female)
a)
Circuit between pins 4 and 6 is short-circuited in the projector.
b)
Circuit between pins 7 and 8 is short-circuited in the projector.
Equipment complying with IEC 61000-3-12 (SRX-
T110 only)
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Pin number Signal name Meaning
1NC
2 RD Received Data
3 TD Transmit Data
4
DTR
a)
Data Terminal Ready
5 GND Ground
6
DSR
a)
Data Set Ready
7
RTS
b)
Request to Send
8
CTS
b)
Clear to send
9NC
12345
6789