Sony UP20 Printer User Manual


 
Introduction
Location and Function of Parts and Controls
5
Location and Function
of Parts and Controls
For details, refer to the pages given in parentheses.
Front Panel
A PRINT indicator (for the UP-21MD)
Lights while the printer is printing.
POWER indicator (for the UP-20)
Lights in green while the printer power is on.
B ALARM indicator (for the UP-21MD)(61)
Lights in orange when the ink ribbon or paper is
exhausted, the paper jams, or another problem
occurs.
PRINT/ALARM indicator (for the UP-20) (61)
Lights while the printer is printing in green.
Lights in orange when the ink ribbon or paper is
exhausted, the paper jams, or another problem
occurs.
C Remote sensor (12)
Aim the head of the remote control unit toward this
sensor.
D Printer window display (only for the UP-21MD)
Displays messages that also appear along the
bottom edge of the monitor screen. The printer
window display has a narrower display range and
shows only a limited number of characters. Also
displays the menu screen line at which the cursor is
positioned. If an error occurs, a corresponding error
message is displayed.
The contrast of the printer window display can be
adjusted on the SYSTEM SETUP menu.
(“Adjusting the Brightness of the Printer Window
Display (Only for the UP-21MD)” on page 53.)
E STOP button (18)
Press this button to stop continuous printing. The
printer stops printing after finishing the printing
item currently being printed.
F MULTI PICTURE button (25)
Press this button to select the desired printout type
on the regular screen. When you press this button,
the currently selected printout type is displayed for
a few seconds. Each time you press this button, the
type is switched in the following sequence: 1, 2, 4,
1....
The setting of MULTI PIX on the LAYOUT
SETUP menu changes linked with the press of this
button.
G PRINT QTY (quantity) button (20)
Press this button to set the number of copies on the
regular screen. You can set any number up to 9.
When you press this button, the currently selected
number is displayed for a few seconds. The setting
of PRT QTY on the PRINTER SETUP menu
changes linked with the press of this button. You
can change the number even when the printer is
printing.
H MEMORY PAGE button (22, 25, 36)
Press to select the memory page.
I MENU button
Press this button to display or clear the menus.
UP-21MD
UP-20