Sony UP-CX1 Printer User Manual


 
Installing the Printer Driver
6
Windows 2000
8
Click [Continue].
After the files are copied, the following screen
appears.
9
Click [Finish].
10
Restart the computer.
This completes the installation of the printer driver.
Printer Driver Installation Under
Windows 2000
1
Connect the UP-CX1 series printer (one only) for
which the driver is to be installed to the computer.
2
Turn power to the connected UP-CX1 series printer
on.
3
Turn power to the computer on, and log on as the
system administrator or a member of the
Administrators group.
The [Found New Hardware Wizard] appears.
If the [Found New Hardware Wizard] does
not appear
Perform the steps described below, with the UP-
CX1 series printer for which the printer driver is to
be installed turned on and connected to the
computer. (Any other USB printers or previously
installed UP-CX1 series printers should not be
connected at this time.)
1 Click [Start], select [Settings], and select
[Control Panel].
2 Double-click [System].
The [System Properties] window opens.
3 Click the [Hardware] tab.
4 Click [Device Manager].
The [Device Manager] window opens.
5 Click [+] at the left of [Universal Serial Bus
controllers].
6 Select [USB Printing Support], right-click and
open the Properties. Confirm that [UP-CX1] is
selected for [Location], and then select
[Uninstall] from the [Action] menu.
7 Restart the computer.
The [Found New Hardware Wizard] appears.
4
Click [Next].
The screen changes as follows.