Filter
Top Products
72
nN
Using Your VAIO Computer
To connect the remote sensor control
✍
If you are using a cable or satellite set-top box, you can attach the remote sensor control to the set-top box, which enables you to control the set-top
box with the remote commander.
You need to remove the back panel cover from the computer before connecting the remote sensor control. See Removing and Replacing the Back
Panel Cover (page 21) for the procedure.
1 Plug the cable from the remote sensor control (1) into the INFRARED TRANSMITTER OUT jack (2) on the computer.
2 Remove the adhesive tape cover from the bottom of the remote sensor control (1).