Filter
Top Products
21
nN
Using your VAIO computer
Setting the password
Use one of the BIOS functions to set the password.
Once you have set the password, you will have to enter the password after the VAIO logo appears. In this way, you can protect your
computer from unauthorized access.
!
You cannot start your computer without entering the password. Make sure not to forget the password.
If you forget the password and need assistance to cancel it, a cancellation fee will be charged.
Adding the password
To add the password, proceed as follows:
1 Turn on your computer.
2 Press F2 when the VAIO logo appears.
The BIOS setup screen appears.
3 Use < or , to select Security to display another screen, select Set Machine Password, and then press Enter.
4 On the password entry screen, enter the password twice and press Enter.
The password should be up to 7 alphanumeric characters long.
✍
The following is to configure your computer to prompt password entry when you turn on your computer or display the BIOS setup screen.
5 Select Password When Power ON under Security.
Press the space bar to change the setting from Disabled to Enabled.
6 Use < or , to select Exit and then Exit (Save Changes); and press Enter.
On the Setup Confirmation screen, confirm that Yes is selected and then press Enter.