Sony VGN-A Laptop User Manual


 
40
nN
Using Your VAIO Computer
Some devices may not function properly if you repeat returning to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you alternate
between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not recognized.
Restart your system to correct the problem. Restarting will restore the original state of the computer.
While the card is inserted, your computer may not enter Hibernate power management mode. It may enter Standby mode. It is recommended that you
remove the card before your computer enters Hibernate mode.
Some PC Cards or their functions may not be compatible with your computer.
If your computer has two PC Card slots:
- They can accommodate (at the same time) two Type I, two Type II or one Type III PC Card. These slots are compatible with CardBus ports.
- Use the lower slot for Type III PC Cards.
- Always use the same slot for a PC Card. Switching slots can cause problems with some PC Cards.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
If an "!" mark appears on the Device Manager tab in the System Properties window, remove the software driver and then reinstall it.
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card
in the correct direction. See the manual supplied with your PC Card for more information on use.
Do not carry your computer while touching the head of a PC Card, as pressure or shock may damage the connector pins.
You do not need to shut down your computer before inserting or removing a PC Card.