Filter
Top Products
101
nN
Using Peripheral Devices >
Connecting a Port Replicator
Attaching Your Computer to the Port Replicator
!
Be sure to install the battery pack before attaching your computer to the port replicator.
To attach your computer to the port replicator
!
Be sure to use the AC adapter supplied with the port replicator.
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator.
Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units.
The monitor port on your computer is not accessible when the computer is attached to the port replicator. Use the DVI-D or MONITOR port on the port
replicator for connecting an external display.
1 Disconnect all peripherals and the AC adapter from the computer.
2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.
3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator (4).