Video Projector
VPH-V20M
INPUT A:
Analogue RGB/Component: BNC
R/R-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
G: 0.7 Vp-p ±2 dB, positive, 75 Ω
G with Sync/Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
SYNC/HD:
Composite sync: 0.6~8.0 Vp-p,
high impedance negative
Horizontal sync: 0.6~8.0 Vp-p,
high impedance negative
VD:
Vertical sync: 0.6~8.0 Vp-p,
high impedance negative
CONTROL S: Loop-through Stereo Mini Jack
Safety Regulations
EN60 065 (TÜV), CE, C-Tick, PTB
Accessories
Supplied accessories: Remote commander RM-PJV20
AA size Batteries (× 2) for remote commander
AC power cord
Spacer for 508 cm (200-inch ) front projection
Spacer (0.2 mm) for 254 cm (70 to 100-inch)
rear projcetion
Spacer (0.8 mm) for 254 cm (70 to 100-inch)
rear projection
Operating manual
Installation manual
Optional accessories: Siganl Interface Cable SIC-10
Interface Unit IFU-1271M
Suspension Support PSS-722
PSS-10
Remote Control Receiver RM-PJ10
80-inch flat screen VPS-80FH
100-inch flat screen VPS-100FH
120-inch flat screen VPS-120FH
70-inch rear screen VPS-702R
© 1998 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony and Betacam are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system
CRT: 7-inch (Phosphor size: 5.5-inch) liquid cooled high
brightness monochrome tubes
Projection lens: High performance hybrid multi-coated lens F1.0/130 mm
Screen: 70-inch (177.8 cm) to 250-inch (635 cm) measured
diagonally (Factory preset: 100-inch (254 cm))
Light output: ANSI 100 lm (15 kHz: 60 Hz, 6500 K)
Peak white: 700 lm All white: 140 lm
Throwing distance: 100-inch (254 cm): 3301 mm (Approx. 11 ft)
200-inch (508 cm): 6417 mm (Approx. 21 ft)
Signals
Color system: NTSC, PAL, SECAM, NTSC
4.43
automatically selected
Resolution: 700 TV lines (Composite video input)
1000 TV lines (RGB input)
Test signals: Cross hair
General
Power requirements: 220 V AC to 240 V AC, 50/60 Hz
Power consumption: 210 W
Operating temperature: 0 to 40 ºC (14 to 104 ºF)
Operating humidity: 35 to 85 %
Storage temperature: -20 to 60 ºC (-4 to 140 ºF)
Storage humidity: 10 to 90 %
Dimensions: 532 (W) × 288 (H) × 597 (D) mm
(21 × 11
3
/8 × 23
5
/8 inches)
Mass: Approx. 30 kg (66 lb 2 oz)
Heat dispersion: 716.6 BTU
Inputs/Outputs
VIDEO IN:
Video*: BNC 1.0 Vp-p ±2 dB, sync negative, 75 Ω
S video*: Mini DIN 4-pin
Y (luminance): 1.0 Vp-p ±2 dB, sync negative, 75 Ω
C (chrominance): Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
or 0.3 Vp-p ±2 dB (PAL), 75 Ω
VIDEO OUT:
Video: BNC 1.0 Vp-p ±2 dB, 75 Ω
*S video has priority over the video input.
Distributed by
MK7168/1OHB(8/98)
Printed in Japan
©1998 Sony Corporation
VPH-V20M Specifications
Connector
Control Panel
